Notes on Pirouettes En Dedans…

Working on pirouettes en dedans (pirouettes to the inside) can be hard. While it seems like they are easier than en dehors turns, the problem with en dedans is the turnout factor. Whether is a pirouette or attitude turn to the inside, these can be rather difficult to master because of the mechanics. The like all turns, the focus should always be on the supporting leg, and even more so with turns to the inside. Sooooo, let’s begin. Remember if you like this post, share it.
The Preparation Position
Pirouettes to the inside… the first thing you are going to want to focus on is the prepping position. Normally, when learning this turn you start in fourth position in croisé, with the back leg straight. You want to make sure that the supporting arm is in a very placed first position, don’t over cross it. For the working arm, the big mistake is opening up too far. Makes sure it is in front of your body… meaning look over your shoulder and make sure your elbow and hand are in front of your shoulder. A lot of times, young dancers will over compensate in this position and that supporting arm will be so far back… This also has to do with your hips and making sure they are in a true croisé. Make sure you can see both hips in the mirror. Remember, you are only crossing to you “box” not the shape of the room.
The Passé
The action of getting into the retiré devant can happen two ways. The first way is when the dancer shifts/ fouettés to a dégagé en face position with arms in seconde. The second way is to directly bring the leg into the turning position. While a lot of the torque for the pirouette happens from the working leg, the tension and the inertia that drives the pirouette is still in the supporting leg.
The Arms
During this time the arms are either moving from third to fifth, or second to first, or second to fifth. Or really any port de bras. The reality is they can be in any position, but there has to be a hair amount of tension built up. Weak arms in a turn is a death sentence. You wouldn’t want to fly in a plane with weak wings, so don’t turn with weak arms. Don’t over twist, and don’t wind up. It is one of the worst things you can do. While most of the energy comes from the arm, it isn’t about swinging into the position, but the amount of control and tension you can build to instantly get into the position and maintaining an inside axial spiral rotation in the upper body while the lower body resists and tries to press en dehors.
The Position
The problem with an inside pirouette is that as the supporting side and arms are rotating the axis inwards on the body, the working leg is working in the opposite direction. The common mistake is for the working leg to slightly turn in to help carry the rotations of the pirouette. This is most commonly seen in younger dancers. The more advance dancer knows the keep the knee behind the shoulder, thus causing the turn to “lose” another rotation. But the position itself is quite complicated. I would say it is more complicated than an en dehors pirouette, but maybe it is just a more difficult turn for myself. Unlike an en dehors pirouette, where you place into one position and create your own g-forge from the turnout and push back of the working leg and you can increase the g-force during the turn… an en dedans pirouette is based on the energy prior to the turn (in the prep and the actions leading into the position).
The Rotation
Ice skaters probably have it the easiest when it comes to rotating to the inside on the axis. While most of their jumps are to the outside, most of their spins start to the inside. The basic idea of their spins is their scratch spin. But here is what we can learn from this concept. The turn to the inside has to do with building momentum and increasing their g force by using their working leg to build the g-force. The biggest factor is the tension they build in their arms, back, and core. The coordination between their arms and working leg is crucial. We can take this same concept and apply it when folding into our pirouette. By building tension in the preparation, we are able to close the momentum on top of our axis, like figure skaters. Now to increase the rotations, the supporting side of our body has to turnout/rotate faster than our working side. Our working side is there just along for the ride, placed in a turned out position.
Increasing the rotations
When turning to the inside the quickest way to build rotations is by getting in to the position as quickly as possible but maintaining the tension. The best way I find to get into the position is letting the working arm shift into seconde, and then immediately pull into the reitré position. Don’t over rotate the second position. Then let the working side’s upper body press forward and spiraling up to the position
Option 2: Personally, I like to think of a barbershop pole, spiraling up into as many rotations as possible. Spiral up over the arch, and constantly keep growing up and out of your hips, through your chest and out through your arms.
Pet Peeves
One of my biggest pet peeves is when preparing, having your hips tilted. I don’t like the idea of “up and forward” in preparation for the en dedans. A lot of people engage this lunging position where the hips are behind the upper body because you are leaning forward. Personally, I prefer that the hips and spine are all in a neutral position right on top of the arch of the supporting side.
Another pet peeve is when turning, not using your lats. Instead of widening the back, people pinch it tight. Remember your back should be completely flat, no chicken wings, not tectonic plates pinching… just keep it completely flat.
Finally, my last pet peeve when turning to the inside is winding up. I hate it. If anything build the moment with the supporting arm, and the second it hits seconde position, pull into fifth (whether that is through first, or cutting en dedans to the fifth). Its one of the biggest mistakes people make and causes them to look extremely turned in. I see it all the time at these competitions, especially in the Paquita etoile variation. The turn in is real… like super real.
To buy the poster click here.
______
You must be logged in to post a comment.